Omnitron Systems Technology Switch 4Tx VT User Manual

iConverter  
®
iConverter 4Tx VT  
4-Port 10/100BASE-TX Managed Ethernet Switch  
The iConverter 4Tx VT 10/100 managed Ethernet switch module  
is a member of the iConverter product family. It provides a  
compact 4-Port 10/100 Ethernet switch that is expandable  
across the iConverter 19-Module, 5-Module and 2-Module  
chassis backplanes, as well as being supported as a  
stand-alone switch with the iConverter 1-Module Chassis.  
The iConverter 4Tx VT supports the IEEE 802.1Q and 802.1p  
standards. It supports the 802.1Q VLAN packet tagging and  
untagging for segregating data in Enterprise networks, and  
enabling secure separation of Service Provider network  
management and customer data to improve security and  
intrusion protection.  
The 802.1Q Q-in-Q stacked tags enable Service Providers to  
4-Port 10BASE-T or 100BASE-TX Ethernet switch module  
offer to their customers secure Ethernet Virtual Private Line  
services which isolates each customer’s data traffic, as well  
as the Service Provider’s management traffic.  
Supports IEEE 802.1Q Tag VLAN, Q-in-Q Multi-tagging  
and Port VLAN  
The 4Tx VT supports the 802.1p prioritization for the delivery of  
Quality of Service (QoS) to real-time applications such as voice  
or video over Ethernet.  
Supports IEEE 802.1p Prioritization QoS  
Per port MIB Statistics reporting of 32 variables  
Individual Port Bandwidth and PortAccess Control  
Flash-upgradable memory  
The iConverter 4Tx VT features Bandwidth and Port Access  
Controls. On a per port basis, the upstream and downstream  
traffic can be independently controlled by selecting from eight  
levels of bandwidth setting. The Port Access Control enables  
the network administrator to easily control and deny individual  
port access while maintaining port configuration for easy port  
re-enabling.  
Multiple 4Tx VT modules can be installed to expand the  
port concentration in a single chassis  
UTP port supports auto-crossover, with 10/100 and  
Half or Full-Duplex auto-negotiation or forced setting  
The ports feature 10/100Mbps, Half/Full-Duplex, and auto-  
negotiation with both hardware and software controls. Hardware  
control is available for two ports while all four ports are under  
software control for these features. RJ-45 crossover support  
eliminates need for a crossover cable and facilitates connectivity  
to different types of network equipment. All four ports support  
an automatic crossover detection mode.  
Backplane Ethernet ports for connectivity to adjacent  
modules  
Management is available with the addition of a  
management module to the chassis  
SNMP management via NetOutlookprovides real-time  
port and module information, remote parameter  
configuration and trap notification  
Two Ethernet backplane ports provide connectivity to adjacent  
modules for network expansion and for providing additional  
10/100 UTP ports for iConverter modular NIDs.  
The 4Tx VT supports reporting of MIB statistics. Statistics are  
available for 32 variables per port, reporting a wide range of  
real-time packet statistics to provide performance and  
operational monitoring.  
Conforms to IEEE 802.3, 10BASE-T and 100BASE-TX  
specifications  
Lifetime Warranty and free 24/7 Technical Support  
 

Miele Convection Oven DGC 5070 User Manual
Nady Systems Microphone ENCORDUETHTLTA1D User Manual
Nikon Camcorder SK 6A User Manual
Nokia Headphones HS 11W User Manual
Nortel Networks IP Phone P0887496 01 User Manual
Numark Industries Karaoke Machine KMX02 User Manual
Omega Thermometer HH603A User Manual
Oregon MP3 Player MP 210 User Manual
Oster Oven 6239 User Manual
Panasonic Vacuum Cleaner MC UG223 User Manual