Omnitron Systems Technology Network Card MUX DEMUX User Manual

NOTE: The iConverter CWDM/X modules can not be installed in slots 4, 8, 12 and  
16 of a 19-Module Chassis or in the top slot of a 2-Module Chassis or in a 1-Module  
Redundant Power Chassis.  
NOTE: The iConverter 8-Channel Double-Wide CWDM/X can only be installed  
in a 2-Module Chassis or 19-Module Chassis with the exception of slots 4/5, 8/9,  
12/13 and 16/17.  
iConverter CWDM/X 4 and 8 Channel MUX/DEMUX  
USER MANUAL  
Design Considerations  
Product Overview  
iConverter CWDM/X modules are passive devices that require no external power.  
Attenuation (signal loss) of less than 2.7dB will be realized through each port on the  
module (see the CWDM/X Data Sheet for exact loss specification for each model).  
Detailed calculations should be performed for each fiber optic link in the network to  
ensure the proper optical devices are specified with sufficient transmitter power.  
Omnitron’s iConverter CWDM/X Coarse Wave  
Division Multiplexing (CWDM) Multiplexer/  
Demultiplexer(MUX/DEMUX)modulessupport  
ITU-T G.694.2 wavelengths between 1270nm  
to 1610nm in 20nm increments. Up to sixteen  
separate wavelengths can be transported over  
a dual fiber common link.  
When calculating optical loss, ensure that the total loss, plus a safety factor (typically  
3dB) does not exceed the optical power budget. The optical power budget is the  
difference between the transmitter optical output power and the receiver’s optical  
sensitivity. The transmitter optical output power and receiver optical sensitivity values  
can be obtained from the manufacturers of the respective equipment. Please consult  
the iConverter data sheets for CWDM/X signal loss specifications.  
The iConverter CWDM/X modules are available in 4 and 8-Channel models,  
supporting a variety of wavelengths and optional port configurations.  
Port Definitions  
For more information, access Omnitron’s documentation download web page to  
view all relevant documents:  
Warranty  
WARNING  
The operating description in this Instruction Manual is for use by qualified personnel only. To avoid electrical shock, do not perform any  
servicing of this unit other than that contained in the operating instructions, unless you are qualified and certified to do so by Omnitron  
Systems Technology.  
Warranty  
This product is warranted to the original purchaser against defects in material and workmanship for a period of ONE YEAR from the date  
will, at its option, repair or replace a product which is proven to be defective.  
Figure 1: Port Locations for 4-Channel CWDM/X Module  
For warranty service, the product must be sent to an Omnitron designated facility, at Buyer’s expense. Omnitron will pay the shipping  
charge to return the product to Buyer’s designated US address using Omnitron’s standard shipping method.  
Limitation of Warranty  
The foregoing warranty shall not apply to defects resulting from improper or inadequate use and/or maintenance of the equipment by  
Buyer, Buyer-supplied equipment, Buyer-supplied interfacing, unauthorized modifications or tampering with equipment (including removal  
of equipment cover by personnel not specifically authorized and certified by Omnitron), or misuse, or operating outside the environmental  
specification of the product (including but not limited to voltage, ambient temperature, radiation, unusual dust, etc.), or improper site  
preparation or maintenance.  
No other warranty is expressed or implied. Omnitron specifically disclaims the implied warranties of merchantability and fitness for any  
particular purpose.  
Exclusive Remedies  
The remedies provided herein are the Buyer’s sole and exclusive remedies. Omnitron shall not be liable for any direct, indirect, special,  
incidental, or consequential damages, whether based on contract, tort, or any legal theory.  
Figure 2: Port Locations for 8-Channel Single-Wide CWDM/X Module  
040-08860-001B 1/09  
Omnitron Systems Technology * 140 Technology Dr. #500 * Irvine, CA 92618  
Page 1  
 

MSi Server MS 9246 User Manual
MTD Edger 245596C User Manual
NETGEAR Switch GS108PE 100NAS User Manual
Nilfisk ALTO Vacuum Cleaner 3308 User Manual
Nortel Networks Vacuum Cleaner FC9219 FC9200 User Manual
Oster Blender Designer Series Push Button Blenders User Manual
Panasonic DVR DMR EX85 User Manual
Panasonic Flat Panel Television TC 32LX700 User Manual
Panasonic Vacuum Cleaner MC GG525 User Manual
ParaBody Home Gym PBF405B User Manual