Omnitron Systems Technology Network Card AS400 3X User Manual

Omnitron Systems  
Technology, Inc.  
............................................................................................................  
OmniRepeater400  
AS400/3X 5250 and 5250 Express Twinax Fiber Converter  
DESCRIPTION  
FEATURES  
n
Twinax 5250 and 5250 Express compatible repeater  
and fiber converter that functions as a twinax to  
twinax repeater to extend twinax distance or as a fiber  
converter to extend distance using fiber media.  
The OmniRepeater400 is an IBM 5250 and 5250 Express  
compatible repeater and fiber converter. It retimes and regenerates  
the data signal to facilitate extended twinax distances and provides  
twinax to fiber conversion which enables 5250 fiber data  
connectivity. It supports distances of up to 5,000 feet on twinax,  
15,000 feet on multimode fiber and 30,000 feet on single-mode  
fiber. The OmniRpeater can be cascaded up to four units to reach  
extra long distances.  
n
n
Seamlessly connects to IBMs AS/400 and 3X local  
and remote twinax controllers and workstations.  
Supports distances of 5,000 feet on twinax, 15,000  
feet on multimode fiber and 30,000 feet on single-  
mode fiber.  
The host connects to the OmniRepeater via twinax. When used  
as a twinax repeater, the OmniRepeater connects the far end via  
twinax and can daisy chain up to seven workstations. When used  
as a fiber converter, it converts the end device back to twinax via  
a second OmniRepeater, or directly to twisted pair via a fiber to  
twisted pair star.  
n
n
Cascadable to four units for extra long distances.  
Retiming repeater technology regenerates and  
reclocks data, eliminating clock jitter and noise.  
The OmniRepeater diagnostics detect and display true port  
activity and parity errors. The ports are monitored for valid frame  
header patterns which are displayed via green Activity LEDs.  
The data is analyzed for errors; a detected error is displayed via  
red Parity Error LEDs. These features assist in installation and  
monitoring of the OmniRepeater operation.  
n
Digital Phase Locked Architecture provides  
acquisition of data rates of 1 Mbps for 5250 or 2  
Mbps for 5250 Express (-2%, +4%), resulting in  
high immunity to noise and crosstalk.  
n
n
Clear display and software independence make  
installation and monitoring intuitive and easy.  
In contrast to a standard active signal booster which is susceptible  
to device data rate variations, noise and crosstalk, the  
OmniRepeaters Digital Phase Locking Architecture (PLA)  
provides data acquisition with data rate variations of -2% to +4%  
Supports single-mode and multimode fiber.  
 

Miele Washer W2514WPS User Manual
Milwaukee Drill 490 16200 User Manual
NETGEAR Network Router RH340 User Manual
Nextar MP3 Player MA968 User Manual
Olympus Camera Accessories SHV 1 User Manual
Omega Juicer VRT330 User Manual
Omega Vehicle Security Switch PSW490B User Manual
Omron Network Card C200H LK401 User Manual
Panasonic Air Conditioner CS E12GFEW 2 User Manual
Panasonic Cell Phone EB G51M User Manual