Omnitron Systems Technology Network Card 10AUI T User Manual

Power Adapter Notice:  
Switch Settings:  
1. When using in a stand-alone configuration, this  
product can be powered from the AUI port and does  
not require an external power source.  
2. If the AUI port is not capable of providing power to  
the FlexPoint 10AUI/T and when using in a stand-  
alone configuration, this product is intended to be  
and must be used only with a Listed Direct Plug-In  
Power Unit marked “Class 2” and rated at 9Vdc, 1  
Amp.  
“RJ45 Cross-Over” Switch: When connecting the UTP to a  
hub or switch, set switch to “Straight-Through” (factory  
setting). When connecting to a workstation, set it to “Cross-  
Over.”  
FlexPointTM 10AUI/T User Instructions  
Description:  
“SQE” switch: When attaching to a PC (or a workstation),  
the SQE switch should be set to “SQE Enable” (factory  
setting). When connecting to a hub or a switch, it should  
be set to “SQE Disable.”  
The FlexPointTM 10AUI/T transceiver is an IEEE 802.3  
compatible Ethernet unshielded twisted pair (UTP) trans-  
ceiver that provides physical medium connection to devices  
featuring Attachment Unit Interface (AUI) connectors. It  
can be powered from theAUI connector, an externalAC  
or 48VDC power adapter or a 14-unit Powered Chassis.  
“UTP Range” switch: Set this switch according to the  
required distance of the UTP connection. For normal  
operation, set it to ”100m” (factory setting). When distance  
of over 100m is required, set it to “>100m”.  
3. When using an external power source, this product  
should always be used only with Omnitron Supplied  
Power Unit model number 9113-PS.  
The FlexPoint 10AUI/T has a 15-pin AUI connector that  
attaches to a mating AUI connector mounted on hosting  
Ethernet DTE equipment such as a workstation or a PC,  
or on a repeater such as a hub or a switch.  
WARNING!  
Note that when used in the “>100m” mode, the sensitivity  
of the FlexPoint 10AUI/T is increased making it more  
sensitive both to signal and noise, so this mode should  
be used with caution when the distance requires it.  
Before inserting the Power Adapter, verify  
that the power on the unit is appropriate  
for your AC line voltage source.  
This FlexPoint 10AUI/T model is described here:  
Model Maximum Distance  
LED Indicators:  
4321 100 meters  
Mounting and Cable Attachment:  
LED  
Power  
AUI-Rx  
UTP-Link/Rx Green  
Collision/  
Jabber  
Color  
Yellow  
Green  
Description  
Power applied  
Host Data Received  
UTP Link / Data Received  
Operating in Half-Duplex, the FlexPoint 10AUI/T fea-  
tures a switch selectable SQE test function that pro-  
vides diagnostic information to the hosting station. It also  
provides LED status about network conditions that assist  
in network installation and maintenance.  
The FlexPoint 10AUI/T can be mounted using a wall-  
mounting kit. It can also be rack-mounted using a  
5-Module shelf or a high-density 14-unit FlexPoint  
Powered Chassis.  
Connect the FlexPoint 10AUI/T to the 15-pin AUI port  
on a PC, workstation, hub or switch; slide the connector  
latch locking it into place. The AUI cable is limited to 50  
meters . Attach a UTP category 3 or higher cable to  
the RJ45 connector. Note that the total length of the  
cable should not exceed 100 meters.  
Yellow  
Collision or Jabber Detected  
The 4321 model can be used stand-alone, wall-mounted,  
rack-mounted on a 5-unit shelf or in a 14-unit AC or  
48VDC Powered Chassis.  
Technical Support:  
For help with this product, contact our Tech. Support:  
Limitation of Warranty  
Warning  
The foregoing warranty shall not apply to defects  
resulting from improper or inadequate use and/or  
maintenance of the equipment by Buyer, Buyer-supplied  
equipment, Buyer-supplied interfacing, unauthorized  
modifications or tampering with equipment (including  
removal of equipment cover by personnel not  
specifically authorized and certified by Omnitron), or  
misuse, or operating outside the environmental  
specification of the product (including but not limited to  
voltage, ambient temperature, radiation, unusual dust,  
etc.), or improper site preparation or maintenance.  
The operating description in this Instruction Manual is  
for use by qualified personnel only. To avoid electrical  
shock, do not perform any servicing of this unit other  
than that contained in the operating instructions, unless  
you are qualified and certified to do so by Omnitron  
Systems Technology, Inc.  
Phone:  
Fax:  
(949) 250-6510  
(949) 250-6514  
Address: Omnitron Systems Technology, Inc.  
140 Technology Drive, #500  
Caution  
Irvine, CA 92618 USA  
All user-required operations can be performed without  
opening the unit. Never attempt to open or remove the  
cover or tamper with the unit.  
E-mail:  
URL:  
Warranty  
No other warranty is expressed or implied. Omnitron  
specifically disclaims the implied warranties of  
merchantability and fitness for any particular purpose.  
This product is warranted to the original purchaser against  
defects in material and workmanship for a period of TWO  
YEARS from the date of shipment. A LIFETIME warranty  
maybeobtainedbytheoriginalpurchaserbyREGISTERING  
this product with Omnitron within 90 days from the date of  
shipment. TO REGISTER, COMPLETEAND MAILOR FAX  
THE REGISTRATION PORTION OFTHIS INSTRUCTION  
MANUAL TO THE INDICATED ADDRESS. Or you may  
register your product on the internet at http://  
Omnitron will, at its option, repair or replace a product which  
is proven to be defective.  
Exclusive Remedies  
The remedies provided herein are the Buyer’s sole and  
exclusive remedies. Omnitron shall not be liable for any  
direct, indirect, special, incidental, or consequential  
damages, whether based on contract, tort, or any legal  
theory.  
Forwarrantyservice, theproductmustbesenttoanOmnitron  
designated facility, at Buyer’s expense. Omnitron will paythe  
shipping charge to return the product to Buyer’s designated  
US address using Omnitron’s standard shipping method.  
Form: 040-04321-001C 11/07  
 

Miele Refrigerator KFN 12943 SD edt cs User Manual
Miele Washer W3370 User Manual
Multi Tech Systems Switch Hub User Manual
Nikon Camcorder S2H05000501 User Manual
Nikon Camera Accessories WP N1 User Manual
NordicTrack Treadmill NTL190070 User Manual
Onkyo Speaker SKW 770 User Manual
Panasonic MP3 Player AJ PCS060G User Manual
Panasonic TV Receiver M0212 0 User Manual
ParaBody Home Gym PBF011 User Manual