North Star Portable Generator 165959 User Manual

PTO Generator Trailer  
ITEM # 165959  
For use on 13000, 27500, and  
60000 PTOG North Star  
Generators or Other PTO  
Generators up to 60kW.  
P r o v e n P e r f o r m a n c e  
M165959A  
PLACE MANUAL NAMEPLATE HERE  
OWNER’S MANUAL  
00641  
Any Questions, Comments, or Problems?  
Call Customer Service at 1-800-270-0810  
Hours: Monday - Friday 7:30 AM to 5:30 PM  
Saturday 7:30 to 11:30 AM CST  
 
STEP 1  
Open hardware bag and separate the components.  
FASTENERS (actual size)  
1/2-13 Ny-Loc Nut  
Qty. 10  
1/2-13 X 1.25” Long  
Hex Head Bolt Qty. 8  
1/2” Flat Washer  
Qty. 18  
3/8-16 Hex Nut  
Qty. 2  
3/8-16 Ny-Loc Wing Nut  
Qty. 6  
1/2-20 X 1.25” Long  
Carriage Bolt Qty. 2  
3/8” Flat Washer  
Qty. 6  
MISCELLANEOUS COMPONENTS (not actual size)  
Lug Bolts  
Qty. 10  
Red Reflector  
Qty. 2  
Amber Reflector  
Qty. 2  
PTO Implement  
Shaft Retainer  
Qty. 2  
Cord Hooks  
Qty. 2  
Hitch Pin With Chain  
and Lynch Pin  
Qty. 1  
00672  
3
 
STEP 2  
Remove remaining components from the box. Discard unpainted shipping bracket. Place trailer Base on two  
supports at least twelve(12) inches high.  
00673  
STEP 3  
Bolt the Axle to the Base with (6) 1/2”-13 x 1.25 hex head bolts, (12) 1/2” flat washers, and (6) 1/2-13 Ny-Loc  
nuts.  
00674  
4
 
STEP 4  
Assemble Tongue Arm to Base with (2) 1/2-13 X 1.25” hex head bolts, (4) 1/2 Flat Washers, and (2) 1/2-13  
Ny-Loc Nuts. Assemble Tongue to Tongue Arm with (2) 1/2-13 X 1.25 Carriage bolts, (2) 1/2 flat washers,  
and (2) 1/2-13 Ny-Loc nuts. Note: The Tongue Arm and Tongue is adjustable to fit many different PTO  
Generators and PTO Implement Shafts. You may need to adjust the Tongue to fit your implement shaft. The  
Tongue Arm pivots and is adjustable to fit different PTO Generators, if you have a NorthStar PTO Generator  
use the center hole.  
00675  
STEP 5  
Assembly wheels to hubs with the 10 lug bolts.  
00676  
5
 
STEP 6  
Apply the (2) red reflectors to the rear of the trailer and (2) amber reflectors to front sides of the trailer as  
shown. Assemble the (2) cord hooks to the trailer with (2) 3/8-16 hex nuts, (2) 3/8 flat washers, and (2) 3/8-  
16 Ny-Loc wing nuts. Assemble the (2) PTO Implement shaft retainer to the trailer with (4) 3/8 flat washers,  
and (4) 3/8-16 Ny-Loc wing nuts. Discard any remaining fasteners.  
00677  
STEP 7  
Mount NorthStar PTO Generators to trailer using one of the three following bolt patterns. For other PTO  
Generators you may need to drill mounting holes.  
NorthStar Item  
NorthStar Item  
#165949  
#165929  
NorthStar Item  
#165937A  
NorthStar  
Item  
#165937B &  
C
6
 

Murphy Portable Generator MGC447 User Manual
National Instruments Cordless Drill cFP 20xx User Manual
Net Optics Switch PA CU AR User Manual
NXP Semiconductors Switch PIP3107 D User Manual
One for All Universal Remote 705016 User Manual
Oster Electric Steamer 4711 User Manual
Panasonic Car Stereo System CQ C7703W User Manual
Panasonic Cordless Drill EY6105 UI User Manual
Panasonic Power Hammer EY6808 User Manual
ParaBody Home Gym 858102 User Manual